South Dakota CDL: Combination Vehicles Practice Test

Not quite. The answer is to test the trailer brakes.

The trailer hand valve (also known as a trolley valve or Johnson bar) controls only the trailer brakes, not the tractor brakes. You can use it to test the trailer brakes. Don't use it while you're driving, though. If you apply it while you're driving, you'll brake the trailers but not the tractor, which can cause a skid. Instead, use the foot brake, which sends air to the tractor brakes as well as the trailer brakes.

Not quite. The answer is the trailer's emergency brakes to come on.

The trailer air supply valve (which is manually controlled by the red dashboard knob) senses air pressure in the supply (emergency) line. If air pressure in the supply line is lost, the trailer air supply valve will close automatically, and the resulting loss of air pressure in the tractor protection valve will cause it to close as well. And loss of pressure in the supply line will cause the trailer emergency (spring) brakes to come on.

Not quite. The answer is Yes, if you're not sure of your path of travel.

Backing a combination vehicle is potentially hazardous. Before you start to back up, check your intended path of travel. Exit the cab and walk around the vehicle. Check your clearance to the sides and overhead, in and near the path of your vehicle.

Not quite. The answer is glad hands

As part of your vehicle inspection test, if your vehicle is equipped with air brakes and has a trailer, you will inspect the air connections between the truck or tractor and the trailer. These connections are made with hose couplers (commonly called "glad hands" because they vaguely resemble shaking hands). These glad hands have rubber seals to form a tight connection and prevent air from escaping. Make sure that the glad hands are locked in place and free of damage or air leaks.

Not quite. The answer is Bobtail tractors can take longer to stop than fully loaded combination vehicles.

When a combination vehicle is empty or lightly loaded, its braking distance increases. The very stiff suspension springs and strong brakes give poor traction and make it very easy to lock the wheels. Likewise, "bobtail" tractors (tractors without semitrailers) can take longer to stop than a fully loaded tractor-trailer. Be very careful when driving a "bobtail" tractor.

Not quite. The answer is of the danger of making the trailer skid.

The trailer hand valve (also known as a trolley valve or Johnson bar) controls only the trailer brakes, not the tractor brakes. If you apply it while you're driving, you'll brake the trailers but not the tractor. This can cause a skid or even a jackknife. Instead, use the foot brake, which sends air to the tractor brakes as well as the trailer brakes. Note: The trailer hand valve control is usually located on the right side of the steering column or on the dashboard as in this image.

Not quite. The answer is Nothing is likely to happen until you try to apply the brakes.

If a leak has developed in the service line, air tank pressure may remain close to normal – until you try to brake. Then the air loss from the leak will cause the air pressure to drop quickly. If the air pressure drops far enough, the emergency brakes will come on.

Not quite. The answer is a fully loaded trailer

Trucks brake best when they are used as they were designed: to carry a properly balanced load. Empty trucks actually have longer stopping distances than loaded trucks because they have less traction. The stiff suspension springs and strong brakes give poor traction and make it easier to lock the wheels.

Not quite. The answer is No, because the brakes on the trailer wheels caused the skid to begin with.

The trailer skid was caused by the brakes locking the wheels. Applying the trailer hand brake might make that even worse. Instead, release the brakes so the trailer wheels can roll again and regain traction.

Not quite. The answer is applying and releasing the trailer brakes and listening for brake sounds.

After you've connected the air lines, double-check the connection and make sure the brakes are working. Shut off the engine so you can hear the brakes. Apply the brakes and listen for the sound of the brakes being applied. Release the brakes and listen for the hiss of escaping air.

Not quite. The answer is secured but with enough slack for turns.

During your walk-around inspection, make sure that the electrical and air lines are secure but have enough slack to stay attached and secure even when the vehicle is turning.

Not quite. The answer is get away from your vehicle and call 911 or the posted emergency number.

A train traveling at 60 mph can take more than a mile to come to a complete stop. If your vehicle gets stuck on a railroad track, don't spend any time trying to free your vehicle. Get out of your vehicle and walk quickly at about a 45-degree angle to the tracks in the direction from which you expect trains to approach. That way, if your vehicle is hit, you won't be struck by flying debris. Call 911 or the telephone number on the railroad crossing sign for assistance.

Not quite. The answer is the trailer emergency glad hand.

During the coupling process, after you've backed the tractor till it's touching the trailer and you've parked the tractor, it's time to connect the air lines. Connect the tractor emergency air line to the trailer emergency glad hand. Connect the tractor service air line to the trailer service glad hand.

Not quite. The answer is make sure the ground is solid and can support the weight of the trailer.

Before uncoupling the trailer, be sure you're leaving it on firm ground that can support its weight.

Not quite. The answer is the brakes on the trailer wheels caused the skid in the first place.

The trailer hand valve (also known as a trolley valve or Johnson bar) controls only the trailer brakes, not the tractor brakes. If you're already jackknifing because the trailer wheels locked up, applying the trailer brakes with the hand valve can make it even worse. Instead, stop braking. The rear wheels will start to roll again and you can steer to correct the skid.

Not quite. The answer is at normal pressure.

Before backing under a trailer during the coupling process, make sure that the air pressure is at normal levels so you'll be able to brake safely.

Not quite. The answer is see it in your mirrors.

The earliest way to notice that your trailer is jackknifing is to see it swinging out in your mirrors.

Not quite. The answer is With the tractor frame under the trailer

After you've unlocked the fifth wheel, pull the tractor forward until the fifth wheel is out from under the trailer but the tractor frame is still under the trailer. This will prevent the trailer from falling onto the ground should the landing gear fail to support the trailer.

Not quite. The answer is ten times as likely to roll over in a crash as empty rigs.

When you stack cargo high in a trailer, you raise its center of gravity, which makes the trailer more prone to rolling over. A fully loaded tractor-trailer is ten times as likely to roll over in a crash as an empty one.

Not quite. The answer is the trailer emergency brakes will come on.

If a major leak develops in the service line, you may not notice anything wrong – until you try to apply the service brakes. Then the air loss from the leak will lower the air tank pressure quickly. If it goes low enough, the trailer emergency brakes will come on.