Wyoming CDL: Tanker Vehicles Practice Test

Not quite. The answer is may require a longer stopping distance than full trucks.

With all types of combination vehicles, the weight of cargo helps the wheels get traction. When a combination vehicle is empty or lightly loaded, its braking distance increases. The very stiff suspension springs and strong brakes give poor traction and make it very easy to lock the wheels.

Not quite. The answer is At the start of each trip and each time you stop

If you have a placarded trailer with dual tires, you should check the tires at the start of each trip and each time that you stop for any reason, whether to rest or to refuel. Use a tire pressure gauge to get an accurate reading.

Not quite. The answer is driving too fast for conditions.

Over-braking and over-steering can cause skids. Both over-braking and over-steering are more likely when you're driving too fast for the current road conditions.

Not quite. The answer is the front or the rear

Bulkheads help separate the load. When loading such tanks, distribute the weight evenly. Avoid putting too much weight on the front or the rear of the vehicle.

Not quite. The answer is the top of the tank

In general, the Maximum Allowable Working Pressure (MAWP) of a pressurized tank is the maximum pressure that the weakest part of the tank can handle in normal operation. For a cargo tank on a motor vehicle, the federal definition of MAWP assumes that the weakest part is at the top of the tank.

Source: 49 CFR 178.320

Not quite. The answer is Always

Escape ramps are designed with soft gravel, upgrades, or both, to slow down vehicles that experience brake failure on a downgrade. Regardless of the type of CMV you're driving, if your brakes have failed, head for one of these escape ramps, which can save lives, equipment, and cargo.

Not quite. The answer is Wet roads can double the stopping distance at any speed.

To control surge, know the stopping distance of your vehicle and brake far in advance of a stop whenever possible. Bear in mind that your vehicle's stopping distance on wet roads will be about double its stopping distance on dry roads.

Not quite. The answer is Set the parking brake and pull forward gently.

The parking brake is meant to keep your vehicle from moving. The best way to test it is to apply the parking brake and then try to pull forward gently. The parking brake should hold your vehicle in place. If you're pulling one or more trailers, test each trailer's parking brakes in the same way.

Not quite. The answer is the type of liquid.

Different liquids expand at different rates as the temperature increases. In science, the percentage increase of expansion for a given change in temperature is called the coefficient of thermal expansion. This value depends on the type of liquid. You need to find out the likely percentage increase for the type of liquid you'll be hauling, and allow enough room (called outage) for the expansion to take place.

Not quite. The answer is some liquids expand more than others when they get warm.

Different liquids expand at different rates as the temperature increases. In science, the percentage increase of expansion for a given change in temperature is called the coefficient of thermal expansion. This value depends on the type of liquid. You need to find out how much outage you will need to allow for the type of liquid you'll be hauling.

Not quite. The answer is 15 to 50

If your vehicle is placarded, you must stop between 15 and 50 feet from the nearest rail at a railroad crossing. After you have done so, proceed once you are sure that no train is approaching, and do not shift while you are on the tracks.

Not quite. The answer is You should avoid traveling alongside other vehicles whenever possible.

Whenever another vehicle is traveling alongside yours, there's always a chance that the vehicle might try to move into your lane and accidentally hit your vehicle. Also, the vehicle is blocking you from changing lanes. It's safer to find an open spot where there are no vehicles on either side of you. (Of course, that may not be possible in heavy, congested traffic.)

Not quite. The answer is There will be less front-to-back surge than in a tank without baffles.

A baffled tank has bulkheads with holes through which the liquid can flow forward or backward but with less force than if there were no baffles. This will reduce forward-and-backward surge, making it less likely that surge will push your vehicle forward when you try to stop.

Not quite. The answer is Spring brakes (or wheel chocks)

When parking a tank trailer, you should always apply the parking brake. On a modern trailer equipped with air brakes, applying the parking brake control will exhaust air from the brake chambers and cause the spring brakes to come on. However, an old trailer may lack spring brakes and instead use compressed air to set the parking brakes. In this case, you must chock the wheels to prevent the trailer from moving. A leak somewhere in the air braking system may cause the parking brakes to fail eventually.

Not quite. The answer is If it has to stay very clean

For transporting food products such as milk, regulations prohibit baffled tanks because of the difficulty of cleaning the inside of a baffled tank.

Not quite. The answer is Upshift.

If your hydraulic brakes fail while you're driving, try pumping the brake pedal to build up enough hydraulic pressure to stop your vehicle. If this fails, downshift to use engine braking and apply the parking brake. Release the parking brake before you lock the wheels. If all else fails, look for an escape route. Head for an escape ramp or an open field and let your vehicle slow to a stop.

Not quite. The answer is can have strong forward-and-backward surge.

Baffles are often used in tanks to reduce forward-and-backward surge. Nevertheless, certain cargoes, such as milk and other liquid food products, must be transported in smooth bore, unbaffled tanks. (Sanitation regulations forbid the use of baffles because they are hard to keep sufficiently clean.) These tanks are liable to have very strong forward-and-backward surge. Be very careful when driving vehicles with such tanks.

Not quite. The answer is the distance you can see ahead.

No matter what type of motor vehicle you are driving at night (even a passenger car), you must drive at a speed that lets you stop within the range of your headlights. (In the dark, you have no way of knowing what lies beyond the reach of your headlights.) With low beams, you can see ahead only about 250 feet. Yet if you're driving a vehicle with air brakes at 45 mph, your vehicle's stopping distance may be as long as 346 feet. Hence, with low beams at 45 mph, you will not be able to brake in time to avoid a hazard that you see.

Not quite. The answer is bulkheads.

Separators that divide a space into liquid-tight compartments are called bulkheads. The tank on a tanker vehicle may have bulkheads to divide the tank into separate compartments.

Not quite. The answer is Read the vehicle's manual to learn how to do it.

Tank vehicles come in many models and sizes, each with special items that you need to check during an inspection. Read the vehicle's manual to learn how to inspect it properly.