Wyoming CDL: Pre-Trip Inspection Practice Test

Not quite. The answer is hub oil seals and axle seals.

As part of your pre-trip inspection of the wheels, check the axle seals and the hub oil/grease seals for leaks. Look for oil or grease on the wheels and any visible evidence of cracks or leaks. If the wheel has a sight glass, you can visually confirm that the oil level is adequate.

Not quite. The answer is Seats

In a passenger vehicle, the seats must be safe for passengers to sit in. During your pre-trip inspection, check that the seats are firmly attached to the floor. Make sure that the seatbacks and frames are not broken. Check that the seat cushions are securely attached to the seat frames and are in satisfactory condition.

Not quite. The answer is Platform

During your pre-trip inspection, check that there are no cracks or other damage to the platform structure that supports the fifth wheel skid plate.

Not quite. The answer is Leaks

As part of your engine inspection, check the ground below the engine compartment for puddles or dripping liquids.

Not quite. The answer is air lines and electrical lines

During your pre-trip inspection, check the electrical lines and air hoses (or hydraulic hoses for hydraulic brakes). Make sure that the lines and hoses are not cut, chafed, spliced, or worn. Also make sure they are not tangled, pinched, or dragging on parts of the tractor.

Not quite. The answer is Steering linkage

The steering gearbox (also called the steering box) is connected to the steering column. The steering linkage transmits steering action from the steering box to the front wheels. This linkage includes the Pitman arm, drag link, tie rod, and upper and lower steering knuckles. During your pre-trip inspection, check that these components are securely mounted. Check for loose or missing nuts, bolts, or cotter pins. Check that nothing is wrapped around the tie rod.

Not quite. The answer is the support frame.

As part of your vehicle inspection test, if your vehicle has a semitrailer, you will have to check the landing gear. Check that it is fully raised and no parts are missing. Check that the crank handle is secure and the support frame is undamaged. If the landing gear is power operated, check for air or hydraulic leaks.

Not quite. The answer is Parking brake

The parking brake keeps your vehicle from moving when it's parked. The mechanism is separate from the service brakes that you use in normal driving.

Not quite. The answer is carbon soot.

As part of your vehicle inspection test, you will inspect the exhaust system for leaks. Obvious signs of leaks include breaks or holes in the pipes or other components. Other signs include rust or carbon soot, increased noise, or increased vibration.

Not quite. The answer is the parking brakes

Test the parking brakes first. Then to test the service brakes, start by releasing the parking brakes.

Not quite. The answer is Both of the above

Your steering system is critical to your safety, especially in an emergency. Excessive steering wheel play may make it difficult for you to know which way your front wheels are pointed. A leak of power steering fluid may eventually lead to power steering failure if left uncorrected.

Not quite. The answer is Steering box

When you turn the steering wheel, the steering box translates this motion into turning the front wheels. During your pre-trip inspection, check that the steering box is in good condition, securely mounted, and not leaking. Also check that no nuts, bolts, or cotter keys are missing.

Not quite. The answer is Shock absorbers

During your pre-trip inspection, check the shock absorbers on every axle of your vehicle (including the trailers if any) to be sure that they are securely mounted and not leaking.

Not quite. The answer is Spacers

Wheel spacers adjust wheel offset. During your pre-trip inspection, inspect each wheel that has wheel spacers to make sure that no spacers are missing, bent, damaged, or rusted through. Make sure that dual tires aren't touching. Dual tires that touch can catch fire.

Not quite. The answer is The windshield and mirrors

Windshields and mirrors should be clean and free of damage, illegal stickers, or obstructions that could impede visibility.

Not quite. The answer is Exhaust

Your vehicle's exhaust system consists of a set of pipes and other components for removing the hot combustion gases produced by your engine. One of these gases, carbon monoxide (CO), can be particularly poisonous to you if an exhaust leak causes CO to build up in the cab. During your pre-trip inspection, check the exhaust system for cracks, holes, and severe dents. Check for sounds and signs of leaks. There should be no loose, broken, or missing parts. No exhaust system parts should be rubbing against fuel system parts, tires, wires, air lines, or other moving parts of the vehicle.

Not quite. The answer is seals

Damaged door seals allow drafts or rain to get inside. Check if the door seals are intact and undamaged. Replace any leaky door seals.

Not quite. The answer is Hydraulic brakes

If your vehicle has hydraulic brakes, test them by pumping the brake pedal three times and then applying firm pressure to it for five seconds, making sure the pedal does not move during that time. If your vehicle has air brakes, test them by performing the final air brake check as described in the Wyoming Driver License Manual for Commercial & Heavy Vehicles.

Not quite. The answer is Catwalk

Check that the steps leading up to the cab and catwalk (if any) are clear of obstructions and secured to the tractor frame.

Not quite. The answer is you'll fail the entire CDL skills test.

If your vehicle is equipped with air brakes but you fail to check them correctly, you'll fail the vehicle inspection portion of your CDL skills test (and therefore, the entire skills test).