Wyoming CDL: Combination Vehicles Practice Test

Not quite. The answer is the trailer emergency glad hand.

During the coupling process, after you've backed the tractor till it's touching the trailer and you've parked the tractor, it's time to connect the air lines. Connect the tractor emergency air line to the trailer emergency glad hand. Connect the tractor service air line to the trailer service glad hand.

Not quite. The answer is the trailer's emergency brakes to come on.

The trailer air supply valve (which is manually controlled by the red dashboard knob) senses air pressure in the supply (emergency) line. If air pressure in the supply line is lost, the trailer air supply valve will close automatically, and the resulting loss of air pressure in the tractor protection valve will cause it to close as well. And loss of pressure in the supply line will cause the trailer emergency (spring) brakes to come on.

Not quite. The answer is emergency line

The trailer air supply valve (which is manually controlled by the red dashboard knob) senses air pressure in the supply (emergency) line. If air pressure in the supply line is lost, the trailer air supply valve will close automatically, and the resulting loss of air pressure in the tractor protection valve will cause it to close as well. And loss of pressure in the supply line will cause the trailer emergency (spring) brakes to come on.

Not quite. The answer is Both of these statements are true.

The trailer hand valve (also known as a trolley valve or Johnson bar) controls only the trailer brakes, not the tractor brakes. You can use it to test the trailer brakes. Don't use it while you're driving, though. If you apply it while you're driving, you'll brake the trailers but not the tractor, which can cause a skid. Instead, use the foot brake, which sends air to the tractor brakes as well as the trailer brakes.

Not quite. The answer is The trailer emergency brakes will come on.

The trailer air supply valve (which is manually controlled by the red dashboard knob) senses air pressure in the supply (emergency) line. If air pressure in the supply line is lost, the trailer air supply valve will close automatically, and the resulting loss of air pressure in the tractor protection valve will cause it to close as well. And loss of pressure in the supply line will cause the trailer emergency (spring) brakes to come on.

Not quite. The answer is 20 to 45 psi.

The tractor protection valve is located in the tractor, usually at the rear of the cab. Its purpose is to keep air in the tractor's air brake system should the trailer break away or develop a bad leak. The tractor protection valve is designed to close automatically if the air pressure falls into the range specified by the manufacturer, typically 20–45 psi.

Not quite. The answer is "Bobtail" tractors can take longer to stop than a combination vehicle loaded to the maximum gross weight.

When a combination vehicle is empty or lightly loaded, its braking distance increases. The very stiff suspension springs and strong brakes give poor traction and make it very easy to lock the wheels. Likewise, "bobtail" tractors (tractors without semitrailers) can take longer to stop than a fully loaded tractor-trailer. Be very careful when driving a "bobtail" tractor.

Not quite. The answer is Rear

The shut-off valve should be closed only at the rear of the last trailer so that air will flow to the brakes of all trailers but no farther.

Not quite. The answer is fully loaded

The weight of cargo helps the wheels get traction. When a combination vehicle is empty or lightly loaded, its braking distance increases. The very stiff suspension springs and strong brakes give poor traction and make it very easy to lock the wheels.

Not quite. The answer is Normal

To test the trailer air brake system, first charge it with air. To do this, push in the red trailer air supply knob, or (in older vehicles) move the tractor protection valve control from the "emergency" position to the "normal" position. Wait until the air pressure reaches normal before you check for crossed air lines.

Not quite. The answer is Neutral

Before you inspect the trailer supports of the landing gear, secure the tractor by applying the parking brake and placing the transmission in Neutral.

Not quite. The answer is applying and releasing the trailer brakes and listening for brake sounds.

After you've connected the air lines, double-check the connection and make sure the brakes are working. Shut off the engine so you can hear the brakes. Apply the brakes and listen for the sound of the brakes being applied. Release the brakes and listen for the hiss of escaping air.

Not quite. The answer is It should not be done.

The trailer hand valve (also known as a spike, a trolley valve, or a Johnson bar) controls only the trailer brakes, not the tractor brakes. If you apply it while you're driving, you'll brake the trailers but not the tractor. This can cause a trailer skid.

Not quite. The answer is your brakes might fail.

On a combination vehicle, the brakes on the tractor and all trailers must work properly. If your combination vehicle is equipped with air brakes, check that air flows to all trailers and test both the trailer service brakes and the trailer emergency brakes.

Not quite. The answer is On the left front or left rear corner

On a trailer, the yellow ABS malfunction lamp is located on the left front or left rear corner. Make sure you know where to look for it.

Not quite. The answer is It will keep dirt and water out of the lines.

Some vehicles are equipped with "dead-end" or dummy couplers. When the air lines are not connected to a trailer, connect the glad hands to the dummy couplers to keep water and dirt out of the glad hands and air lines. If your vehicle doesn't have dummy couplers, you may be able to connect the glad hands to each other.

Not quite. The answer is To prevent steering problems

One of the first steps in coupling a tractor to a trailer is to check that the fifth wheel skid plate is greased as required. If the fifth wheel plate is not properly lubricated, friction between the plate and the trailer apron could cause steering problems.

Not quite. The answer is ten times as likely to roll over in a crash as empty rigs.

When you stack cargo high in a trailer, you raise its center of gravity, which makes the trailer more prone to rolling over. A fully loaded tractor-trailer is ten times as likely to roll over in a crash as an empty one.

Not quite. The answer is to the driver's side.

If you must back your vehicle on a curved path, back toward the driver's side. You'll be able to watch the rear of your vehicle from your driver's-side window.

Not quite. The answer is a yellow malfunction lamp on the left side.

A trailer with ABS has a yellow malfunction lamp on either the left front corner or the left rear corner. Make sure you know where to look for it.