Maryland CDL: Double & Triple Trailers Practice Test

Not quite. The answer is closed; latched

When you do a walk-around inspection, you must ensure that the converter dolly is properly connected to the front trailer. Check that the pintle hook of the front trailer is locked onto the eye hook of the converter dolly and properly latched. Otherwise, the dolly could come loose. Even worse, if the dolly comes loose while it's still coupled to the rear trailer, the tow bar could fly up, possibly injuring someone.

Not quite. The answer is fifth; one or two

A semitrailer can be connected to a converter dolly because, like the rear of a typical tractor, it has a fifth wheel and one or two axles.

Not quite. The answer is leaks of air or hydraulic fluid

Check the landing gear as part of your walk-around inspection. Check that no parts are missing and it isn't bent or damaged. If the landing gear is power operated, check its hoses, fittings, and other parts for signs or sounds of escaping air or hydraulic fluid.

Not quite. The answer is Slow to a safe speed before entering the curve, then accelerate slightly through it.

The safest way to take a curve is to slow down before the curve and then accelerate slightly through the curve. Braking in a curve risks a skid.

Not quite. The answer is foot pedal.

You can use the trailer hand valve (also known as a spike or Johnson bar) to test the trailer service brakes. During normal driving, however, all the service brakes on your vehicle are controlled with the foot pedal, which applies air to the service brakes at all the wheels.

Not quite. The answer is A sudden movement with the steering wheel can result in a tipped-over rear trailer.

Because of rearward amplification (the "crack-the-whip" effect), the rearmost trailer is much more prone to rolling over. Avoid sudden steering changes that could cause the rearmost trailer to roll over.

Not quite. The answer is There are more critical parts to check.

There is nothing inherently wrong with double or triple trailers. There are just more critical parts to check. For a triple, you must check the critical parts of three trailers and two converter dollies, problems in any of which can cause serious trouble.

Not quite. The answer is a separate air tank.

Federal regulations require brakes on every wheel of a combination vehicle, including the wheels of the semitrailers and converter dollies. Like semitrailers, dollies have their own air brakes and their own air tanks.

Source: 49 CFR § 393.42

Not quite. The answer is that you can pull straight through.

When parking a long vehicle, you should look for a parking space that you can go straight through rather than back out of. Also note the layout of the parking lot and your parking space's location within it so you won't have difficulty exiting the parking space later.

Not quite. The answer is to lower its landing gear.

After you have uncoupled the rear trailer from the converter dolly, you need to uncouple the converter dolly from the front trailer. You do this as follows: 1. Lower the landing gear of the dolly. 2. Disconnect the safety chains. 3. Apply the dolly's spring brakes or chock its wheels to keep the dolly from moving. 4. Release the pintle hook connecting the dolly to the trailer ahead of it. 5. Slowly pull clear of the dolly.

Not quite. The answer is Rocky Mountain double

A double pup trailer consists of two 28.5-foot trailers, known as "pup trailers." A double pup trailer is also known as an STAA trailer, named for the Surface Transportation Assistance Act (STAA). This standard-double configuration is the only type of double trailer that is allowed nationwide. A Rocky Mountain double trailer consists of a 40- to 53-foot trailer followed by a 28.5-foot pup trailer. Rocky Mountain doubles are allowed in certain Western states. A turnpike double trailer consists of two 48-foot trailers. Turnpike doubles can be found traveling on expressways in the Eastern states.

Not quite. The answer is foot pedal.

The trailer hand valve (also called the Trolley Valve or Johnson Bar) operates only the trailer brakes, not the tractor brakes. Hence, use it only when you want to test the trailer brakes. Don't use it in normal driving because braking the trailers and not the tractor can cause a trailer to skid. The foot brake sends air to all the brakes on the vehicle – the tractor and all trailers. There is much less danger of causing a skid or jackknife when using just the foot brake.

Not quite. The answer is There should be none.

When the rear trailer is properly coupled to the converter dolly, there should be no space between the upper and lower fifth wheel. (Similarly, when the front trailer is properly coupled to the tractor, there should be no space between the upper and lower fifth wheel either.) If there is visible space, something is wrong. Don't drive the vehicle until you have corrected the problem because the trailer might come loose.

Not quite. The answer is slightly raised.

When connecting the rear trailer to the converter dolly, lock the trailer brakes and raise the trailer landing gear slightly off the ground so it won't be damaged if the trailer moves. Then pull forward with the trailer brakes still locked, to check that the rear trailer is locked onto the converter dolly. If it's not, at least the landing gear will keep the rear trailer from falling onto the ground.

Not quite. The answer is directly in front of the converter dolly.

Back the first trailer into position in front of the tongue of the dolly. Hook the dolly to the pintle hook on the first trailer. Then latch the pintle hook securely. Raise the dolly's landing gear.

Not quite. The answer is make things look smaller and farther away than they really are.

A convex mirror has a wider field of view than a flat mirror. However, objects viewed in a convex mirror look smaller and farther away. Remember this when you're trying to judge the distance of an object that you're viewing in a convex mirror.

Not quite. The answer is Turnpike double trailer

A double pup trailer consists of two 28.5-foot trailers, known as "pup trailers." A double pup trailer is also known as an STAA trailer, named for the Surface Transportation Assistance Act (STAA). This is the only type of double trailer that is allowed nationwide. A Rocky Mountain double trailer consists of a 40- to 53-foot trailer followed by a 28.5-foot pup trailer. Rocky Mountain doubles are allowed in certain Western states. A turnpike double trailer consists of two 48-foot trailers. Turnpike doubles can be found traveling on expressways in the Eastern states.

Not quite. The answer is You should avoid traveling alongside other vehicles whenever possible.

Whenever another vehicle is traveling alongside yours, there's always a chance that the vehicle might try to move into your lane and accidentally hit your vehicle. Also, the vehicle is blocking you from changing lanes. It's safer to find an open spot where there are no vehicles on either side of you. (Of course, that may not be possible in heavy, congested traffic.)

Not quite. The answer is Doubles/triples flip over from quick steering movements more easily than do many other vehicles.

Because of rearward amplification (the "crack-the-whip" effect), steering changes affect the rearmost trailer much more than they affect the front trailer or the tractor. Avoid quick or sharp steering changes that could cause the rearmost trailer to roll over.

Not quite. The answer is Uncouple the third semitrailer from the second dolly.

To couple a triple-trailer combination, you couple the tractor and first semitrailer to the second and third semitrailers. But to uncouple the triple-trailer combination, you start by just uncoupling the third semitrailer from the rest of the combination.