Pennsylvania CDL: Tanker Vehicles Practice Test

Not quite. The answer is Get out of your vehicle and away from the tracks.

If your vehicle gets stuck on a railroad track, get everyone including yourself out of your vehicle. Have everyone walk at about a 45-degree angle to the tracks in the direction from which you expect a train to approach. That way, if your vehicle is hit, none of you will be struck by flying debris. Once you've reached a safe location, call 911 or the telephone number on the railroad crossing sign.

Not quite. The answer is with holes that let liquid flow through.

Tank baffles are bulkheads with holes through which the liquid can flow, but with less force than in tanks without such baffles. These baffles significantly reduce forward-and-backward surge but not side-to-side surge, so the risk of surge causing a rollover remains.

Not quite. The answer is Side-to-side

Baffled tanks have bulkheads with holes through which the liquid can flow. The bulkheads significantly reduce forward-and-backward surge but not side-to-side surge, so the risk of surge causing a rollover remains.

Not quite. The answer is partly engage the clutch before you take your right foot off the brake.

When you start your vehicle, avoid rolling backward or else you may hit someone behind you. Set the parking brake whenever necessary to keep from rolling back. Release the parking brake only when you have applied enough engine power to keep from rolling back. If you have a manual transmission vehicle, partly engage the clutch before you take your right foot off the brake. On a tractor-trailer equipped with a trailer brake hand valve, the hand valve can be applied to keep from rolling back.

Not quite. The answer is Before loading it, driving it, or unloading it

You should inspect a tank vehicle before loading it, driving it, or unloading it. This is to ensure that it is safe to carry out these activities and the vehicle can safely hold its liquid or gas contents.

Not quite. The answer is Environment

The S.T.A.M.P.E.D. acronym is widely used to assist you in obtaining the correct hoses and fittings for your needs. S: the required size of the hose; T: the temperatures to which the hose will be subjected; A: the application (use) to which the hose will be put; M: the types of material (liquid, gas, etc.) that will have to flow through the hose; P: the maximum working pressure of the hose; E: the required fittings at the ends of the hose; D: the date at which the hose must be delivered to you.

Not quite. The answer is starting or stopping.

Smooth bore tanks lack baffles or bulkheads to reduce forward-and-backward surge. When you start from a stopped position, the liquid will surge backward, pushing your vehicle backward. When you try to stop, the liquid will surge forward, pushing your vehicle farther forward. Perform such actions slowly and carefully.

Not quite. The answer is Rear

Shut-off valves are used in the service and supply air lines at the rear of trailers used to tow other trailers. These valves permit closing off the air lines when another trailer is not being towed. You must check that all shut-off valves are in the open position except the ones at the rear of the last trailer, which must be closed.

Not quite. The answer is use controlled or stab braking.

Sudden or hard braking can cause the liquid in the tank to surge forward, pushing your vehicle forward. If you must stop quickly, use controlled or stab braking instead. (However, don't use stab braking if your vehicle is equipped with antilock brakes.)

Not quite. The answer is S-cam drum brake.

Foundation brakes are present on each wheel. In North America as of this writing, S-cam drum brakes are much more common than wedge or disc brakes.

Not quite. The answer is There will be less front-to-back surge than in a smooth bore tank.

Bulkheads divide a tank into several smaller tanks. This will reduce forward-and-backward surge, making it less likely that surge will push your vehicle forward when you try to stop. However, when loading and unloading the smaller tanks, be sure to pay attention to weight distribution.

Not quite. The answer is There will be less front-to-back surge than in a tank without baffles.

A baffled tank has bulkheads with holes through which the liquid can flow forward or backward but with less force than if there were no baffles. This will reduce forward-and-backward surge, making it less likely that surge will push your vehicle forward when you try to stop.

Not quite. The answer is 1,000 gallons or more.

Federal regulations define a "tank vehicle" as a commercial motor vehicle designed to transport liquids or gases within tanks that have an individual rated capacity of more than 119 gallons each and an aggregate rated capacity of 1,000 gallons or more. To drive such tank vehicles, you must have a Tank (N) endorsement or Combination Hazmat and Tank (X) endorsement on your CDL.

Source: 49 CFR § 383.5

Not quite. The answer is bulkheads with holes that let the liquid flow through.

Baffled tanks have bulkheads with holes through which the liquid can flow but with less force than in a tank without such bulkheads.

Not quite. The answer is Both of the above

It takes special skills to drive a tanker carrying liquid cargo because of the vehicle's high center of gravity and the possibility that the liquid cargo may surge forward and backward or from side to side. The high center of gravity increases the risk of a rollover. And the liquid surge can push the vehicle dangerously forward or sideways, which can also cause a rollover.

Not quite. The answer is Both of the above are true.

Tank vehicles have a high center of gravity, typically five or six feet above the ground. This makes a tanker top-heavy, which makes it more prone to rollovers than other types of vehicles. Tests have shown that a tank vehicle can roll over at the speed limits posted for curves. To take an upcoming curve safely, slow down well below the posted speed limit.

Not quite. The answer is receive a citation and be prevented from further driving.

It is illegal to knowingly carry liquids or gases in a leaking tank. If you do, you may receive a citation and be prevented from driving further.

Not quite. The answer is MC-306 (DOT-406)

MC-306 (DOT-406) cargo tanks carry liquids under very low or no pressure (maximum allowable pressure of 3 psi for MC-306 and 4 psi for DOT-406). The cargo tank has an oval or elliptical cross section and is usually compartmented. These tanks are commonly used to carry gasoline, diesel fuel or fuel oil, and other flammable liquids.

Not quite. The answer is some liquids expand more than others when they get warm.

Different liquids expand at different rates as the temperature increases. In science, the percentage increase of expansion for a given change in temperature is called the coefficient of thermal expansion. This value depends on the type of liquid. You need to find out how much outage you will need to allow for the type of liquid you'll be hauling.

Not quite. The answer is are bulk containers that are not permanently attached to a vehicle.

A portable tank is bulk packaging that is not permanently attached to a vehicle. The tank is loaded or unloaded while it is off the vehicle. Then the tank is put on the vehicle for transportation. Hence, the portable tank must show the owner or lessee's name. "Bulk packaging" means that the tank's capacity is more than 450 L (119 gallons) of liquid, or more than 454 kg (1,000 pounds) of gas. Some portable tanks have a capacity of 25,000 L (6,600 gallons).