North Carolina CDL: Tanker Vehicles Practice Test

Not quite. The answer is 70%

It takes special skills to operate a tank vehicle safely. About 70% of tank truck drivers haul hazardous materials, such as gasoline. Doing so takes even more special skills. Such drivers must obtain both a tank vehicle (N) endorsement and a hazardous materials (H) endorsement on their CDLs, or a combination tank vehicle and hazardous materials (X) endorsement.

Not quite. The answer is are bulk containers that are not permanently attached to a vehicle.

A portable tank is bulk packaging that is not permanently attached to a vehicle. The tank is loaded or unloaded while it is off the vehicle. Then the tank is put on the vehicle for transportation. Hence, the portable tank must show the owner or lessee's name. "Bulk packaging" means that the tank's capacity is more than 450 L (119 gallons) of liquid, or more than 454 kg (1,000 pounds) of gas. Some portable tanks have a capacity of 25,000 L (6,600 gallons).

Not quite. The answer is Read the vehicle's manual to learn how to do it.

Tank vehicles come in many models and sizes, each with special items that you need to check during an inspection. Read the vehicle's manual to learn how to inspect it properly.

Not quite. The answer is a rollover.

A side-to-side surge exerts lateral (sideways) forces on the tank. Once a side-to-side surge begins, unless the driver takes action, the tank will keep swaying more and more until the vehicle rolls over.

Not quite. The answer is Spring brakes (or wheel chocks)

When parking a tank trailer, you should always apply the parking brake. On a modern trailer equipped with air brakes, applying the parking brake control will exhaust air from the brake chambers and cause the spring brakes to come on. However, an old trailer may lack spring brakes and instead use compressed air to set the parking brakes. In this case, you must chock the wheels to prevent the trailer from moving. A leak somewhere in the air braking system may cause the parking brakes to fail eventually.

Not quite. The answer is the movement of the liquid.

It takes special skills to drive a tanker carrying liquid cargo because of the vehicle's high center of gravity and the possibility that the liquid cargo may surge forward and backward or from side to side. The liquid surge can push the vehicle dangerously forward or sideways, which can cause a rollover. Once a side-to-side surge begins, unless the driver takes action, the tank will keep swaying more and more until the vehicle rolls over.

Not quite. The answer is your vehicle will stay in a straight line.

If you must brake in an emergency, brake in a way that keeps your vehicle in a straight line while still letting you turn if necessary. You can use the "controlled braking" method or (in a vehicle without antilock brakes) the "stab braking" method.

Not quite. The answer is roll over.

Baffled tanks can control back-and-forth surge but not side-to-side surge. During sudden steering changes, side-to-side surge can cause your tanker to roll over. Avoid such sudden moves when possible.

Not quite. The answer is liquids or gases.

According to federal regulations, you need a tank endorsement to drive a tank vehicle that requires you to have a CDL. A tank vehicle is defined as a commercial motor vehicle that transports a bulk cargo of liquid or gas within one or more tanks that are either permanently or temporarily attached to the vehicle. [49 CFR 383.5],

Source: 49 CFR 383.93

Not quite. The answer is Get out of your vehicle and away from the tracks.

If your vehicle gets stuck on a railroad track, get everyone including yourself out of your vehicle. Have everyone walk at about a 45-degree angle to the tracks in the direction from which you expect a train to approach. That way, if your vehicle is hit, none of you will be struck by flying debris. Once you've reached a safe location, call 911 or the telephone number on the railroad crossing sign.

Not quite. The answer is Slow down gradually.

Braking on a slippery surface can lock the wheels and cause a skid. Brake gently and slow down very gradually.

Not quite. The answer is 250 feet.

You should always be able to stop within the distance you can see ahead. Fog, rain, or other conditions may require that you slow down to be able to stop in the distance you can see. If your headlights let you see only 250 feet ahead, adjust your speed so that you can stop within that distance. Otherwise, by the time you notice a hazard ahead, you may not be able to stop in time to avoid it.

Not quite. The answer is may require a longer stopping distance than full trucks.

With all types of combination vehicles, the weight of cargo helps the wheels get traction. When a combination vehicle is empty or lightly loaded, its braking distance increases. The very stiff suspension springs and strong brakes give poor traction and make it very easy to lock the wheels.

Not quite. The answer is Before loading it, driving it, or unloading it

You should inspect a tank vehicle before loading it, driving it, or unloading it. This is to ensure that it is safe to carry out these activities and the vehicle can safely hold its liquid or gas contents.

Not quite. The answer is bulkheads with holes that let the liquid flow through.

Baffled tanks have bulkheads with holes through which the liquid can flow but with less force than in a tank without such bulkheads.

Not quite. The answer is S-cam drum brake.

Foundation brakes are present on each wheel. In North America as of this writing, S-cam drum brakes are much more common than wedge or disc brakes.

Not quite. The answer is Unstable loads such as hanging meat or livestock can require extra caution on curves.

Hanging meat can sway on curves, and livestock can move around. These motions can affect the handling of your vehicle. One reason that you must drive a tanker vehicle carefully is that liquid surge can push the vehicle in the same direction as the surge. This can be especially hazardous on icy roads, where your truck may be pushed forward a dangerous amount, maybe past a red light into an intersection. Another concern is that liquid expands when it warms. Outage is the space in the tank that must be allocated to handle the expansion. Different types of liquids expand by different amounts. Therefore, the amount of outage you will need depends on the type of liquid.

Not quite. The answer is joints.

When you're checking the pipes, connections, and hoses of your tank vehicle for leaks, you should pay special attention to joints. Pipe joints are among the weakest points in a piping system. Joints can deteriorate over time and start to leak.

Not quite. The answer is Your brakes may fail because of water freezing.

Your air tanks hold a mixture of water and compressor oil. If left inside to collect at the bottom, the water may freeze and cause brake failure.

Not quite. The answer is driving too fast.

Over-braking and over-steering can cause skids. Both over-braking and over-steering are more likely when you're driving too fast for the current road conditions.