Louisiana CDL: Tanker Vehicles Practice Test

Not quite. The answer is driving too fast for conditions.

Over-braking and over-steering can cause skids. Both over-braking and over-steering are more likely when you're driving too fast for the current road conditions.

Not quite. The answer is bulkheads.

Separators that divide a space into liquid-tight compartments are called bulkheads. The tank on a tanker vehicle may have bulkheads to divide the tank into separate compartments.

Not quite. The answer is Before loading it, driving it, or unloading it

You should inspect a tank vehicle before loading it, driving it, or unloading it. This is to ensure that it is safe to carry out these activities and the vehicle can safely hold its liquid or gas contents.

Not quite. The answer is can affect the handling of your vehicle.

Liquid surge can greatly affect your vehicle's handling. Surge can push the vehicle in the same direction as the surge. This can be especially hazardous on icy roads, where a truck may be pushed forward a dangerous amount, maybe past a red light into an intersection. On curves, side-to-side surge can cause a rollover even when traction is good.

Not quite. The answer is closed before you drive the vehicle.

To help prevent leaks, close all manhole covers before you drive the vehicle.

Not quite. The answer is 70%

It takes special skills to operate a tank vehicle safely. About 70% of tank truck drivers haul hazardous materials, such as gasoline. Doing so takes even more special skills. Such drivers must obtain both a tank vehicle (N) endorsement and a hazardous materials (H) endorsement on their CDLs, or a combination tank vehicle and hazardous materials (X) endorsement.

Not quite. The answer is Much of the tanker's weight is high up off the ground.

An object with a high center of gravity is top-heavy; much of its weight is high off the ground. Top-heavy objects are more prone to toppling over. Loaded tankers tend to have a high center of gravity because the tanks are so tall. This makes liquid tankers more prone to rolling over. Tests have shown that tankers can roll over on curves even at the speeds posted. On curves, slow down well below the posted speeds.

Not quite. The answer is on slippery roads.

When you're coming to a stop, the liquid in the tanks tends to surge forward. If you're on a slippery surface, the surge may shove your truck forward into another vehicle or an intersection. Learn how your tanker handles in such situations.

Not quite. The answer is Always

Escape ramps are designed with soft gravel, upgrades, or both, to slow down vehicles that experience brake failure on a downgrade. Regardless of the type of CMV you're driving, if your brakes have failed, head for one of these escape ramps, which can save lives, equipment, and cargo.

Not quite. The answer is Both of the above are true.

Tank vehicles have a high center of gravity, typically five or six feet above the ground. This makes a tanker top-heavy, which makes it more prone to rollovers than other types of vehicles. Tests have shown that a tank vehicle can roll over at the speed limits posted for curves. To take an upcoming curve safely, slow down well below the posted speed limit.

Not quite. The answer is baffles.

Baffles are devices that regulate the flow of liquid. In a tank vehicle, baffles are a type of bulkhead with holes through which liquid may flow but with reduced force.

Not quite. The answer is four

You placard your vehicle to warn everyone around you that you are transporting hazardous materials. Therefore, you must have placards on all four sides of your vehicle.

Not quite. The answer is 20 mph

If you've moved onto a shoulder that may have a loose surface, let your vehicle slow down to about 20 mph before you brake. Braking at a higher speed on a loose surface can cause a skid.

Not quite. The answer is You should avoid backing whenever you can.

Backing up a large vehicle is always dangerous, even with a helper. Try to avoid backing up as much as possible.

Not quite. The answer is speed up slightly

The posted speed for a curve may be safe for cars but not for tankers because of their relatively high center of gravity. Tests have shown that a tanker can roll over on a curve when traveling at the posted speed. The safest way to take a curve in a tanker is to slow down before the curve and then accelerate slightly through the curve.

Not quite. The answer is an unbaffled tank.

A smooth bore tank is another name for an unbaffled tank. Without baffles, there is likely to be strong forward-and-backward surge. Nevertheless, certain cargoes such as milk and other liquid food products must be transported in smooth bore, unbaffled tanks. Sanitation regulations forbid the use of baffles because they are hard to keep sufficiently clean.

Not quite. The answer is the distance you can see ahead.

No matter what type of motor vehicle you are driving at night (even a passenger car), you must drive at a speed that lets you stop within the range of your headlights. (In the dark, you have no way of knowing what lies beyond the reach of your headlights.) With low beams, you can see ahead only about 250 feet. Yet if you're driving a vehicle with air brakes at 45 mph, your vehicle's stopping distance may be as long as 346 feet. Hence, with low beams at 45 mph, you will not be able to brake in time to avoid a hazard that you see.

Not quite. The answer is At the start of each trip and each time you stop

If you have a placarded trailer with dual tires, you should check the tires at the start of each trip and each time that you stop for any reason, whether to rest or to refuel. Use a tire pressure gauge to get an accurate reading.

Not quite. The answer is starting or stopping.

Smooth bore tanks lack baffles or bulkheads to reduce forward-and-backward surge. When you start from a stopped position, the liquid will surge backward, pushing your vehicle backward. When you try to stop, the liquid will surge forward, pushing your vehicle farther forward. Perform such actions slowly and carefully.

Not quite. The answer is There will be less front-to-back surge than there is in a tanker without baffles.

Baffled tanks have bulkheads with holes to reduce forward-and-backward surge. This will reduce the chance that forward surge will push your vehicle dangerously forward when you're slowing or stopping. However, these bulkheads don't significantly reduce side-to-side surge, so rollovers can still occur.