Arizona CDL: Tanker Vehicles Practice Test

Not quite. The answer is You should not apply the brakes while turning.

To avoid a crash or other hazard, keep both hands on the steering wheel so you can turn as quickly as possible. However, turn just enough to avoid the hazard. A too-sharp turn risks a skid or rollover. While turning quickly, avoid braking. Braking in a turn can easily lock the wheels and cause a skid.

Not quite. The answer is distribution of weight.

If the tank is divided into several smaller tanks (compartments) by bulkheads, pay attention to the distribution of weight whenever you load or unload these tanks. Avoid putting too much weight on the front or the back of your vehicle.

Not quite. The answer is closed before you drive the vehicle.

To help prevent leaks, close all manhole covers before you drive the vehicle.

Not quite. The answer is The posted speed for a curve may be too fast for a tank vehicle.

Tank vehicles have a high center of gravity. Much of a loaded tanker's weight is carried five or six feet above the ground. This makes a tanker top-heavy, which makes it more prone to rollovers than other types of vehicles. Tests have shown that a tank vehicle can roll over at the speed limits posted for curves. The safest way to take a curve in a tanker is to slow down well below the posted speed limit before you enter the curve.

Not quite. The answer is 20 mph

If you've moved onto a shoulder that may have a loose surface, let your vehicle slow down to about 20 mph before you brake. Braking at a higher speed on a loose surface can cause a skid.

Not quite. The answer is Unstable loads such as hanging meat or livestock can require extra caution on curves.

Hanging meat can sway on curves, and livestock can move around. These motions can affect the handling of your vehicle. One reason that you must drive a tanker vehicle carefully is that liquid surge can push the vehicle in the same direction as the surge. This can be especially hazardous on icy roads, where your truck may be pushed forward a dangerous amount, maybe past a red light into an intersection. Another concern is that liquid expands when it warms. Outage is the space in the tank that must be allocated to handle the expansion. Different types of liquids expand by different amounts. Therefore, the amount of outage you will need depends on the type of liquid.

Not quite. The answer is both of the above.

When deciding how much liquid you can load on your tank vehicle, you must consider the weight of the liquid, the amount of space to allocate for the liquid to expand as it heats up (called outage), and all legal weight limits on your vehicle. A full tank of a dense liquid may exceed the legal weight limits, so you can only fill the tanks partially with such a liquid.

Not quite. The answer is You should avoid traveling alongside other vehicles whenever possible.

Whenever another vehicle is traveling alongside yours, there's always a chance that the vehicle might try to move into your lane and accidentally hit your vehicle. Also, the vehicle is blocking you from changing lanes. It's safer to find an open spot where there are no vehicles on either side of you. (Of course, that may not be possible in heavy, congested traffic.)

Not quite. The answer is a high center of gravity.

It takes special skills to drive a tanker carrying liquid cargo because of the vehicle's high center of gravity and the possibility that the liquid cargo may surge forward and backward or from side to side. Much of a loaded tanker's weight is carried five or six feet above the ground. This makes a tanker top-heavy, which makes it more prone to rollovers than other types of vehicles. Tests have shown that a tank vehicle can roll over at the speed limits posted for curves. The safest way to take a curve in a tanker is to slow down well below the posted speed limit before you enter the curve.

Not quite. The answer is Watch gauges and mirrors and use your senses to check for problems.

During your trip, you should be watching a number of things, such as your mirrors, gauges, instruments, lights, tires, and cargo. Use several of your senses – sight, hearing, smell, and feel – to detect possible trouble.

Not quite. The answer is receive a citation and be prevented from further driving.

It is illegal to knowingly carry liquids or gases in a leaking tank. If you do, you may receive a citation and be prevented from driving further.

Not quite. The answer is 20 feet long.

An ISO standard portable tank is a metal tank enclosed in a steel frame. The frame is 19.8556 feet (6.05 meters) long, 7.874 feet (2.40 meters) wide, and either 7.874 feet (2.40 meters) high or 8.374 feet (2.55 meters) high.

Not quite. The answer is the front or the rear

Bulkheads help separate the load. When loading such tanks, distribute the weight evenly. Avoid putting too much weight on the front or the rear of the vehicle.

Not quite. The answer is allowance for expansion of liquid.

When liquid heats up, it expands, and outage is the space in the tank that is allocated to handle the expansion. Different types of liquids expand by different amounts. Therefore, the amount of outage you will need depends on the type of liquid.

Not quite. The answer is your vehicle will stay in a straight line.

If you must brake in an emergency, brake in a way that keeps your vehicle in a straight line while still letting you turn if necessary. You can use the "controlled braking" method or (in a vehicle without antilock brakes) the "stab braking" method.

Not quite. The answer is both a hazardous materials (H) endorsement and a tank vehicle (N) endorsement.

A tank vehicle (N) endorsement qualifies you to haul liquids or gases. However, if those liquids or gases are classified as hazardous materials, you must also have a hazardous materials (H) endorsement to haul them. To obtain each of these endorsements, you must pass a specialized knowledge test. Note: These days, if you obtain both endorsements, your CDL may include the combined endorsement code X (tank vehicle and HazMat) instead of both H and N.

Not quite. The answer is Slow down gradually.

Braking on a slippery surface can lock the wheels and cause a skid. Brake gently and slow down very gradually.

Not quite. The answer is with holes that let liquid flow through.

Tank baffles are bulkheads with holes through which the liquid can flow, but with less force than in tanks without such baffles. These baffles significantly reduce forward-and-backward surge but not side-to-side surge, so the risk of surge causing a rollover remains.

Not quite. The answer is leaks.

When you inspect your tank vehicle, the most important thing to check for is leaking tanks. It is illegal to knowingly carry liquids or gases in a leaking tank. Check around and underneath the vehicle for any signs of leaks. Also check all tanks, hoses, pipes, and connections for leaks.

Not quite. The answer is are bulk containers that are not permanently attached to a vehicle.

A portable tank is bulk packaging that is not permanently attached to a vehicle. The tank is loaded or unloaded while it is off the vehicle. Then the tank is put on the vehicle for transportation. Hence, the portable tank must show the owner or lessee's name. "Bulk packaging" means that the tank's capacity is more than 450 L (119 gallons) of liquid, or more than 454 kg (1,000 pounds) of gas. Some portable tanks have a capacity of 25,000 L (6,600 gallons).